Toyota Avalon Operating Manual page 39

58
1-1. For safe use
Installing child restraints using a seat belt (child restraint lock
function belt)
Rear-facing ⎯ Infant seat/convertible seat
■
1
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
AVALON (U)_(OM41440U)