Toyota Avalon Operating Manual page 179

Selecting conventional constant speed control mode
When constant speed control mode is selected, your vehicle will main-
tain a set speed without controlling the vehicle-to-vehicle distance.
Select this mode only when vehicle-to-vehicle distance control mode
does not function correctly due to dirt etc.
1
Press the "ON-OFF" button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
2
Switch to constant speed con-
trol mode.
(Push the lever forward and
hold for approximately one sec-
ond.)
Constant speed control mode indi-
cator will come on.
When in constant speed control
mode, to return to vehicle-to-vehi-
cle distance control mode, push
the lever forward again and hold
for approximately 1 second.
After the desired speed has been
set, it is not possible to return to
vehicle-to-vehicle distance control
mode.
If the engine switch is turned off
and then turned to IGNITION ON
mode again, the vehicle will auto-
matically return to vehicle-to-vehi-
cle distance control mode.
Adjusting the speed setting:
→P. 191
Canceling and resuming the speed
setting: →P. 191
AVALON (U)_(OM41440U)
4-5. Using the driving support systems
201
4