Graco 243238 Instructions Manual page 2

WARNING
Fire and explosion hazard: Solvent and paint fumes can ignite or
explode.
To help prevent a fire and explosion:
DUse in an extremely well ventilated area.
DEliminate all ignition sources; such as pilot lights, cigarettes and
static arcs from plastic drop cloths. Do not plug or unplug power
cords or turn lights on or off in spray area.
DGround Sprayer, object being sprayed, paint and solvent pails.
DHold gun firmly to side of grounded pail when triggering into pail.
DUse only conductive airless paint hose.
DDo not use 1,1,1-trichloroethane, methylene chloride, other haloge-
nated hydrocarbon solvents or fluids containing such solvents in
pressurized aluminum equipment. Such use could result in a
chemical reaction, with the possibility of explosion.
Fluid injection and high pressure hazard: High pressure spray or
leaks can inject fluid into the body.
To help prevent injection, always:
DEngage trigger safety latch when not spraying.
DKeep clear of nozzle and leaks.
DNever spray without a tip guard.
DDo PRESSURE RELIEF if you stop spraying or begin servicing
sprayer.
DDo not use components rated less than sprayer Maximum Working
Pressure.
DNever allow children to use this unit.
DBrace yourself; gun may recoil when triggered.
If high pressure fluid pierces your skin, the injury might look like
"just a cut". But it is a serious wound! Get immediate medical
attention.
2 3Z9097