LaCie 2big Network User Manual page 58

LaCie 2big Network
User Manual
Problem Question to Ask
The system By default the 2big Network is configured to retrieve its IP address from a DHCP server. If your network is managed
doesn't appear on by a DHCP server and you cannot access your 2big Network, try checking your DHCP server's log. To get the IP ad-
the network. dress, run LaCie Network Assistant, which is located on the LaCie Storage Utilities CD-ROM. If your network is NOT
managed by a DHCP server, the 2big Network uses its default IP address, which is 192.168.xx.100. To change this
IP address, use LaCie Network Assistant.
Is the IP address properly set?
Is your network DHCP enabled?
Are you using AppleTalk under Mac
OS 9.x?
A user does not Has the administrator created an ac-
have access to count for the user?
the LaCie 2big
Network.
Solution
For more information, please see section
If your network is DHCP enabled, please refer to sections
Using LaCie Network Assistant. If your network is not DHCP enabled, you
will need to manually configure the address; please see section
figuring the LaCie 2big Network on a Network Without a DHCP
If you are using AppleTalk under Mac OS 9.x, ensure that the LaCie 2big
Network and the other clients on the network are in the same AppleTalk
zone.
In order for a another user to access the LaCie 2big Network, two condi-
tions must be met: 1) the administrator must create and register a user
with the appropriate privileges; 2) the LaCie 2big Network must be con-
nected to the network via Ethernet for additional users to access the drive.
Troubleshooting
page 58
3.1. Accessing Shared Folders.
2.3. Connecting
2.4. Con-
Server.