Casio Exilim EX-TR15 User Manual page 129

Problem
Images cannot be
transferred over a
USB connection.
Language selection
screen appears
when the camera is
turned on.
There are various
indicators and
values on the
monitor screen.
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory defaults
when I remove the
camera's battery.
Buttons are not
responsive right
after the power has
been turned on.
Possible Cause and Recommended Action
1)The USB cable may not be connected securely. Check all
connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer's USB port.
1)You did not configure initial settings after purchasing the
camera or the camera may have been left with a dead
battery. Check the camera setup (pages 25, 106).
2)There may be a problem with the camera's memory data. If
this is the case, perform the reset operation to initialize the
camera's setup (page 109). After that, configure each
setting. If the language selection screen does not re-appear
when you turn the camera on, it means that the camera's
memory management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording.
You can touch the tab and then touch the "DISP" to select what
information you want to include on the display (page 9).
Load the camera's battery and reconfigure the time and date
settings (page 25). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera's setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
129
Appendix