Advertisement
4.
Align jack lift assembly hole "B" with clear-
ance holes in frame and attach jack assem-
bly to bracket on axle using 3/8" x 1 1/2"
bolt and 3/8" washers and lock nut. See
Figure 4.
B
FIGURE 4
5.
Tighten the 1/2" bolt and 3/8" bolt securely.
The 3/8" bolt will require the use of a 9/16"
deep-well socket wrench to tighten.
6.
Install tow bar by sliding bracket into frame
mount and aligning holes. See Figure 5.
FIGURE 5
7.
Insert four 3/8" x 1" bolts, four washers
placed on outside of frame and four 3/8"
lock nuts. Tighten securely with socket
wrench. See Figure 5.
4
ASSEMBLY
7.
Attach the tie bars to the aerator bed and
to the tow bar as seen in Figure 6. (48"
model only.)
8.
Test the operation of jack lift assembly by
raising transport wheels to highest position
prior to tipping aerator into operating posi-
tion. Lower transport wheels fully before tip-
ping aerator.
TIE BAR
FIGURE 6
FIGURE 7
Advertisement
