Collar Receiver - D.T. System Micro-iDT PLUS SERIES Owner's Manual

Pressing the "NICK" button will make the collar
give a Momentary, or 'Nick' Stimulation. Pressing
the "CONT" button gives a Continuous Stimula-
tion. Pressing the red button on the left side will
make the collar Vibrate only.
Switching between collar units can be
controlled by moving the toggle selection
switch to the desired unit.
Collar Belt with
Embedded Re-
ceiver Antenna
Red Mark
(Magnetic
Switch
Indicator)
PARTS & FUNCTIONS
Remote Training Buttons
Collar Selecting Switch

Collar Receiver

Contacts
LED Indicator Light
8
Battery Charging
Receptacle