Table of Contents
Advertisement
System Setup
TV Set Up
The TV Set Up Menu contains 2 submenus. Each
submenu can be selected by moving the blue bar
with the
Buttons
until the requested
KL
submenu is highlighted and pressing the Enter
Button
to confirm. The selected submenu
will be marked by a light blue circle behind the
submenu text line.
Figure 2c
Picture Calibration
The first submenu is the Picture Calibration
Submenu that allows you to calibrate the picture
of your TV. With the TV Set Up Menu on the
screen, press the
Button
until the Picture
L
Calibration text line is highlighted. Press Enter
to select, followed by pressing the
to access the different calibration settings.
Contrast: The optimal contrast setting will
depend of your preference and the surrounding
light in the TV room. Should you wish to change
this setting, press the Enter Button
highlighted. The TV Set Up Menu will be replaced
temporarily by a Mini Bar on the right top of the
screen, allowing you to verify the changes made
to the contrast setting in real time. To change the
setting press any of the
or
Buttons
N
M
the right contrast setting has been reached. Press
the Enter Button
to return to the calibration
process or the Red Button
to return to your
TV channel.
Figure 2d
Brightness: The next line in the picture calibra-
tion process is the Brightness Setting. Should you
wish to change this setting, press the Enter
Button
once it is highlighted. The TV Set Up
Menu will be replaced temporarily by a Mini Bar
on the right top of the screen, allowing you to
verify the changes made to the brightness setting
in real time. To change the setting press any of
the
or
Buttons
until the right brightness
N
M
setting has been reached. Press the Enter Button
to return to the calibration process or the
Red Button
to return to your TV channel.
26 SYSTEM SETUP
Sharpness: The next line in the picture calibra-
tion process is the Sharpness Setting. Should you
wish to change this setting, press the Enter
Button
once it is highlighted. The TV Set Up
Menu will be replaced temporarily by a Mini Bar
on the right top of the screen, allowing you to
verify the changes made to the sharpness setting
in real time. To change the setting press any of
the
N
or
M
Buttons
setting has been reached. Press the Enter Button
to return to the calibration process or the
Red Button
to return to your TV channel.
Color: The next line in the picture calibration
process is the Color Setting, in which the color
saturation can be adjusted. Should you wish to
change this setting, press the Enter Button
once it is highlighted. The TV Set Up Menu will
be replaced temporarily by a Mini Bar on the
right top of the screen, allowing you to verify the
changes made to the color setting in real time. To
change the setting press any of the
Buttons
until the right color setting has
been reached. Press the Enter Button
return to the calibration process or the Red
Button
to return to your TV channel.
N
Button
Color Balance: The next line in the picture cali-
bration process is the Color Balance Setting,
allowing to adjust the color temperature. Should
you wish to change this setting, press the Enter
Button
once it is highlighted. The TV Set Up
Menu will be replaced temporarily by a Mini Bar
once it is
on the right top of the screen, allowing you to
verify the changes made to the color
balance setting in real time. To change the
setting press any of the
the right color balance setting has been reached.
until
Press the Enter Button
calibration process or the Red Button
return to your TV channel.
Picture Emission: The next line in the picture
calibration process is the Picture Emission
Setting. This setting adjusts the intensity of the
light of the display. Brightly lit rooms will get best
video performance with a Picture Emission set to
"Light". In dark rooms, the "Dark" setting
should be chosen. Should you wish to change
this setting, press the Enter Button
highlighted. The TV Set Up Menu will be replaced
temporarily by a Mini Bar on the right top of the
screen, allowing you to verify the changes made
to the picture emission setting in real time. To
change the setting press any of the
Buttons
until the right picture emission set-
ting has been reached. Press the Enter Button
to return to the calibration process or the
Red Button
to return to your TV channel.
Dynamic Noise Compensation: The next line
in the picture calibration process is the Dynamic
Noise Compensation Setting. With this setting
you can compensate for possible noise that is
detected in any analog video signal. Should you
wish to change this setting, press the Enter
Button
Menu will be replaced temporarily by a Mini Bar
until the right sharpness
on the right top of the screen, allowing you to
verify the changes made to the dynamic noise
compen sation setting in real time. To change the
setting press any of the
the right dynamic noise compensation setting
has been reached. Press the Enter Button
return to the calibration process or the Red
Button
Aspect Ratio: The next line in the picture
calibration process is the Aspect Ratio Setting,
defining in what format you watch a specific
video input. Should you wish to change this set-
N
or
M
ting, press the Enter Button
lighted. The TV Set Up Menu will be replaced
to
temporarily by a Mini Bar on the right top of the
screen, allowing you to verify the changes made
to the aspect ratio setting in real time. To change
the setting press any of the
until the right settings has been reached. Press
the Enter Button
process or the Red Button
TV channel. The aspect ratio can also be changed
directly (and individually for each input) by
pressing the Screen Format Button
The second line in this menu depends on your
choice of TV tuner. If you have selected a DVB tuner,
the DVB-T Setup line will appear, allowing you to
or
Buttons
until
N
M
access the DVB T system Settings Menu, as
described on page 22-23.
to return to the
to
If you use the analog TV tuner, the Automatic Search
and Manual Search menu lines will appear.
once it is
Figure 2e
N
or
M
once it is highlighted. The TV Set Up
or
Buttons
until
N
M
to
to return to your TV channel.
once it is high-
or
Buttons
N
M
to return to the calibration
to return to your
.
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
