Husky fex21 User Manual page 5

•
Slot the battery pack into your fex21 by locating the two small lugs in the
side of the computer unit and pressing the battery pack firmly in place until
the two small catches click into position.
2. Switch the unit on
After fitting the battery, press the
TWICE to switch your fex21 on - it may take a few seconds before the screen
displays data. To switch off, press the key again. If you have not pressed any
keys for a few minutes, your fex21 will automatically switch off to conserve
power.
When you switch the unit on for the first time, it will display the Windows CE
welcome screen. Tap the screen or press
Calibration instructions will be displayed. Read these instructions, then tap
the screen again to start the calibration process. A rectangle will be displayed
on the screen, with a cross at its centre. More calibration instructions will be
displayed above the cross.
Use the pen supplied with your computer and follow these instructions
carefully - your fex21 will then automatically start Windows CE.
NOTE: ensure that only the tip of the pen touches the screen during the
calibration process.
3. Set the date and time
Once the touch screen calibration is complete, the World Clock dialogue box
will be displayed.
If it is not already selected, click on the Home City tab, then select your home
city from the drop list that appears when you click on the downward arrow
symbol (or by starting to type it in, e.g. "l", "o" will section London).
Once you have chosen a city, click on the Date & Time tab and set the correct
date on the calendar. Then set the correct time on the left-hand clock by
dragging the hour and minute hands on the clock face using the pen, or by
typing-in the time.
Finally, click on the Next tab at the bottom right of the screen. Your fex21 is
now set to the correct date and time, and to your own home city.
4. Record Personal Information
The Owner Properties box will now be displayed. You can, if you wish, use
this to enter your name and contact details (this is optional). Once you have
finished, click on the Next tab again - this will complete the set-up process.
Once set-up is complete, follow the on-screen instructions and your fex21 will
start Windows CE.
ù
key at the top centre of the keyboard
´
Contents
and the Touch Screen