Getting Started - Husky fex21 User Manual

Read ALL this leaflet before using your fex21. It contains
essential information about setting up your computer and

getting started.

This is not intended to be an exhaustive guide to the computer. Refer to the
fex21 Developer's Guide (supplied on CD-ROM) for further information about
using and maintaining your fex21.
Your H fex21 computer is rugged and water resistant. However, we
USKY
recommend the following precautions to ensure that your fex21 will give you
many years of reliable service.
•
Avoid unnecessarily subjecting the unit to extreme temperatures, such as
bright sunlight in a vehicle.
•
Avoid leaving it in extremely damp or dusty conditions.
•
Avoid dropping it or subjecting it to severe impacts.
•
Do not use hard or sharp objects to touch the display screen.
•
Do not apply excessive pressure to the display screen.
•
If you carry it in your briefcase or with other items, make sure it is protected
against scratching and other damage.
•
Use only a soft, dry cloth to remove dust and dirt.
•
NEVER use solvents of any kind on the case, the keyboard or the display
screen.
Your fex21 will have left our factory without a battery fitted. To set up a new unit
for the first time you should carry out the following steps:
1. Fit the battery pack
•
If your fex21 is supplied for use with Alkaline batteries then they will need to
be fitted into the battery pack - you should insert four AA size Alkaline cells
into the battery holder, taking care that the polarity of each is correct. If in
doubt, check the label fitted to the battery holder.
NOTE: Alkaline batteries are less suitable for use in low temperatures and
cannot be recharged.
Rechargeable NiMH (Nickel Metal Hydride) batteries, if supplied, are in a
sealed pack, ready to be fitted into the unit.
USING YOUR fex21
SETTING UP
Contents