Charging Batteries - Husky FS/2 User Manual

The FS/2 can be fitted with either rechargeable or
replaceable batteries.
The FS/2 batteries are designed to last more than a
working shift.
However, if power does run low, a warning BATTERY
LEVEL LOW will be displayed. (After a further period
of use, your FS/2 will turn itself off and will not turn on
again.) You should do one of the following:
Return the FS/2 to your base or office.
Or if rechargeable batteries are fitted, recharge them
(see Charging batteries) or fit a fully charged
battery stick (see Replacing batteries).
Or fit three new AA size Alkaline batteries (see
Replacing batteries).

Charging batteries

Charging is recommended before each working shift.
You will need an FS/2 AC Adaptor.
CAUTION: DO NOT ATTEMPT TO RECHARGE
NON-RECHARGEABLE BATTERIES. Check that
rechargeable batteries are fitted to your FS/2, and
are oriented correctly. Use only the FS/2 AC
Adaptor.
Turn the unit off.
G
Plug the AC adaptor into the AC supply.
G
Connect the AC adaptor to Port 3.
G
Turn on the AC supply.
G
Leave the unit to recharge, preferably for 8 hours.
G
Turn off or disconnect from the AC supply.
G
Alternatively, if your system includes the FS/2
Charging and Communications Rack, you can
recharge a unit by placing it on the Rack.
BATTERIES