Table of Contents
Advertisement
USE
___________________________________________________
Function 1
Trim beard ...
... using the wide blade
side
and the telescopic comb
B
attachment
.
H
Ensure the appliance is switched
1
off.
Carefully push comb attachment
2
H onto the blade until it latches
into place.
Ensure it is on the correct side.
The numbers on the telescopic
comb attachment must be visible
on the back of the appliance.
Please note that you can only
use the telescopic comb
attachment if you are using the
wide blade side
Set the required beard length
3
after cutting at the cutting length
adjustment switch
telescopic comb attachment.
The numbers 2, 4, 6, 8, 10 are
values in millimetres.
.
B
of the
I
Now switch on the appliance
4
with switch
A
your beard.
Move the appliance against
your beard's direction of growth
and ensure the telescopic comb
attachment remains in contact
with your skin at all times.
Do not move the appliance too
fast.
Function 2
Trim beard ...
... using the narrow blade
side
without the telescopic comb
C
attachment.
Please note, in this mode you
cannot use the telescopic comb
attachment
supplied with
H
the appliance!
The narrow blade side is for precise
use on small areas.
and start cutting
ENGLISH 21
Advertisement
Table of Contents
