Automatic Seek Tuning - Alpine F1 Status CDA-7990R Owner's Manual

Automatic Seek Tuning

1
Press the SOURCE button until a radio frequency
appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
F1(FM1) F2(FM2)
3
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
4
Press the DN or
cally seek for a station downward or upward
respectively.
The unit will stop at the next station it finds. Press
the same button again to seek the next station.
<Display example>
F 1 1 0 7 .
P 1
F3(FM3) MW
UP button to automati-
1 0
LW
23
-
EN