Fast Forward And Rewind; Scanning Programmes; Manual Reverse; Programme Sensor - Alpine TDM-7574R Owner's Manual

Cassette Player Operation
DN g

Fast Forward and Rewind

1
Press the DN g or f UP button during
tape play to fast rewind or forward the tape
respectively.
The tape side indicator (
or << moves indicating the direction of the tape.
When the end of the tape is reached in the
rewind mode, the player stops automatically and
begins playing from the beginning of the same
side. When the end of the tape is reached in the
fast forward mode, the player stops automatically
and begins playing from the beginning of the
opposite side.
2
Press the f UP button during forwarding to
stop fast forwarding and resume tape play.
Press the DN g button during rewinding to
stop rewinding and resume tape play.
The tape side indicator stops blinking.

Scanning Programmes

1
Press the SCAN button to play the first 10
seconds of each programme on the tape.
"SCAN" appears on the display.
Press the SCAN button to cancel the scanning
when the desired programme is found.
NOTE
The SCAN operation cannot detect blank sections of less
than 4 seconds.

Manual Reverse

1
Press the PROG button during tape play to
change the tape direction to play the other side
of the tape.
The tape side indicators (
show which side of the cassette is being played.
12
-EN
PROG
f UP
or ) blinks and >>
and ) change to
P.S.DN
SCAN
Programme Sensor (P.S.)
1
Press the P.S. DN button once during tape play
to return to the beginning of the current selection
being played.
If you wish to return to a selection further back,
press repeatedly until the number of selections
you would like to skip is shown in the display.
The display will show PS-1 with the first press
and will increase by one with each successive
press up to PS-9. The tape indicator will blink
showing the direction of your search.
Press the P.S. UP button once during tape play
to advance to the beginning of the next selection.
If you wish to advance to a selection further
ahead, press repeatedly until the number of
selections you would like to skip is shown in the
display.
The display will show PS+1 with the first press
and will increase with each successive press up
to PS+9. The tape indicator will blink showing the
direction of your search during searching
operation.
NOTES
The programme sensor feature is functional in the tape
play mode only.
You can advance to the 9th (max.) programme or
return to the 8th (max.) programme.
P.S.UP