Connect Pc To Web - Nokia E71 User Manual

Homepage — Enter the web address of the page
•
you want to display as the home page when you
use this access point.
4. After defining the settings, select Options
Advanced settings to define the advanced
settings or Back to save the settings and exit.
Set up an access point for
WLAN manually
1. Select Menu Tools Settings
> > >
Connection Access points.
>
2. Select Options New access point to create a
>
new access point, or select an existing access point
from the list and then Options Duplicate access
>
point to use the access point as a basis for the new
one.
3. Define the following settings.
Connection name — Enter a descriptive name
•
for the connection.
Data bearer — Select Wireless LAN.
•
WLAN network name — To enter the service
•
set identifier (SSID), that is, the name that
identifies the specific WLAN, select Enter
manually. To select the network from the
WLANs in range, select Search for networks.
Network status — Select Hidden if the
•
network you are connecting to is hidden or
Public if it is not hidden.
www.nokia.com/support
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta
WLAN network mode — If you select
•
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
>
devices can send and receive data directly with
each other, and no WLAN access point is needed.
WLAN security mode — You must select the
•
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings.
WLAN security settings — Edit the security
•
settings for the selected security mode.
Homepage — Enter the web address of the
•
page you want to display as the home page
when you use this access point.
To set up a WLAN access point automatically, use the
WLAN wizard. Select Menu Connectivity
>
wiz..

Connect PC to web

You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of
your device and your PC.
2. Select Connect PC to web. The necessary software
is automatically installed from your device to the
PC.
Yellow Yellow Yellow Yellow Black Black Black Black
WLAN
>
51