Using Your Convection Bake & Grill - Sunbeam Convection Pizza Bake & Grill BT7000 Instruction Booklet

Using your Convection
Bake & Grill
Position the oven on a dry, level surface,
ensuring that the ventilation slots on the side
and top of the appliance are not obstructed.
Plug the power cord into a 230-240 volt
power outlet and turn the power on.
Note: When turned on for the first time, your
Convection Bake & Grill may give off vapours
for up to 10 minutes. This is due to the
initial heating of the materials used. It is
safe, not detrimental to the performance of
the oven and will not reoccur.
Important: Do not force open the oven door
beyond its limit or let the door drop open
as this will distort the door and hinder the
oven's ability to maintain a proper seal.
For pizza
The top two and bottom two elements will
heat when the 'pizza' setting has been
selected.
1.Place the wire rack in the middle shelf in
the sunken position.
2.Place the pizza tray on the shelf.
3.Turn the oven setting to 'PIzzA/ToAST'.
4.Set the temperature to 210ºC and allow
tray to preheat for 5-10 minutes before
using.
To toast
The top two and bottom two elements will
heat when the 'ToAST' setting has been
selected.
1.Place the wire rack into the middle rack
support guide, in the sunken position.
2.Arrange bread on the wire rack.
3.Turn the oven setting to 'ToAST'.
4.Set the temperature control to the
maximum 240ºC.
™
5.To set the time first turn the dial fully
clockwise to 60 minutes, then turn it
ant-clockwise to the toast icons to start
the timer. This ensures accurate timing.
The white toast icon represents the lightest
toast shade and the black toast icon
represents the darkest shade.
6.A bell will sound when the selected toast
cycle has ended.
Note: Toasting times will vary depending
on the type of bread used. Sweet and fruit
breads generally take less time than white or
wholemeal breads.
To grill
The top two elements will heat when the
'GRILL' setting has been selected.
1.Place the wire rack, in either the raised
or sunken position, into the upper rack
support guide.
2.Place the drip tray inside the baking pan
and position the food on the drip tray.
Place the baking pan on the wire rack.
3.Turn the oven setting to 'GRILL'.
4.Set the temperature control to maximum
240ºC.
Note: For best results, allow the griller to
preheat for 5 -10 minutes or as per recipe
instructions.
5.To turn the grill on, turn the timer control
to the desired time. Alternatively, for
continuous operation, turn the timer
control to the oN position.
6.When finished grilling, the oven will switch
off automatically and a bell will sound if
the timer was selected. Alternatively, turn
the timer control to oFF position if the
continuous mode was selected.
7