Removing The Computer Cover - Lenovo C2 Series Hardware Maintenance Manual

Note: For this procedure, it helps to place the computer face-down on a soft flat surface. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
Step 1. Remove the hard disk drive cover. Refer to "Replacing the hard disk drive".
Step 2. Remove the screw that secures the speaker cover to the computer cover.
Step 3. Slide the speaker cover out as shown.

Removing the computer cover

Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the computer cover
Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4. Remove the optical drive. Refer to "Replacing the optical drive".
.
Chapter 8 Replacing hardware
35