Xante CL 30 Manual page 2

To load media in the multi-purpose tray
1. Open the multi-purpose tray and extend the paper feed guides (fig. 1).
Fig. 1 Open the Multi-Purpose Tray
2. Load the media print side up in the multi-purpose tray and adjust the paper guides to the size of
the media being used.
Make sure the media stack does not exceed the multi-purpose tray's media full line.
3. Open the straight-through paper exit (fig. 2) and extend the paper supports.
Always use the straight-through exit path for heavy stock printing. Make sure the straight-through
paper exit is open and the paper supports are extended (fig. 2).
To prevent media jams in the multi-purpose tray
• Don't leave space between the media and the paper guides.
• Do not over fill the tray. Capacity depends on the media's type and weight.
• Do not load damaged media or media of different sizes, quality, or thickness at the same time.
• Do not open or close the rear paper exit while printing.
• Fan paper to separate the sheets.
Once media is loaded into the multi-purpose tray, you need to configure the printer for ultra heavy
media. See your printer user's manual for details.
Light Media Weight
The light media weight settings begin at 24 lb. US Bond (90 g/m
Consumables
The consumable ratings for the Heavy Stock Enabled XANTÉ CL30 consumables are as follow:
• Transport Belt—30,000 letter size prints
• Drum—15,000 letter size prints, 5% coverage prints
• Toner Cartridge—15,000 letter size, 5% coverage prints
• Heavy Stock Feed Assembly—42,000 letter/A4 size prints
• CL30 HSE Fuser only (not a standard CL30 fuser)—30,000 letter size prints.
Use only a CL30 HSE fuser for your printer—not a standard CL30 fuser. The HSE fuser is available in
110 and 220 volt models; make sure to use the correct fuser model. The 110 volt model part number is
200-100169-HS; the 220 model part number 200-100170-HS.
To order these consumables, contact your preferred XANTÉ dealer or call your XANTÉ Consumables
Sales Representative at 800-540-7091.
2 Heavy Stock Enabled CL30 Addendum v3 _________________________________________________
Fig. 2 Open the Straight-Through Paper Exit
2
).