Description Of Functions; Setting The Clock; Setting 12-Hour-Mode; Setting 24-Hour-Mode - Bifinett KH 1106 Operating Instructions Manual

KH1106_Mikrowelle_EN.qxd

Description of functions

Setting the clock

After inserting the mains plug into the
socket and powering on, open the
microwave door once. The LED display
reads "0:00". The oven emits an acou-
stic signal and goes into standby mode.

Setting 12-hour-mode

1. Press button [ "Clock" once.
A red clock symbol appears on the
LED display
indicated via "12 H".
2. Turn the dial o to set the hours.
3. Now press the button [ "Clock" and
the display changes over to the minu-
tes setting.
4. Turn the dial o to set the minutes.
5. To finish press the button [ "Clock".
The following display flashes in the
LED display „:" indicating that the
"Set clock" process has been success-
fully completed.

Setting 24-hour-mode

1. Press button [ "Clock" twice. A red
clock symbol appears on the LED
display
indicated via "24 H".
2. Turn the dial o to set the hours.
3. Now press the button [ "clock"
and the display changes over to the
minutes setting.
4. Turn the dial o to set the minutes.
24.11.2005 17:25 Uhr
and 12-hour-mode is
and 24-hour-mode is
Seite 11
5. To finish press the button [ "Clock/
energy save". The following display
flashes in the LED display „:" indica-
ting that the "Set clock" process has
been successfully completed.
Note: If you press the button "Can-
cel/Stop" y , the appliance automa-
tically changes back to its previous
status.

Setting the kitchen timer

The microwave has a kitchen timer,
which you can use independently with
microwave operation.
1. Press button t "Kitchen timer" if the
appliance is in standby mode. The
LED display shows a flashing "0:00"
and the red clock symbol
up . .
2 Now set the desired time by using
the dial o.
You can select any time range from
5 seconds to 95 minutes.
3. Press button p "Start/quick start".
An acoustic signal is issued and the read
clock symbol
down begins.
As soon as the set time is expired, you
will hear a repeated acoustic signal.
Press the button"Cancel/Stop" y to stop
the acoustic signal.
Note: While the Kitchen timer is
running, the current time cannot
be displayed.
- 11 -
KH 1106
lights
flashes . The count