Video Setting; Audio Setting - Edimax PT-111E User Manual

Network Camera User's Manual
(2) "Mirror"
Horizontally rotates the video.
3. "Environment"
The orientation of video
(1) "indoor"
This option is usually selected when the Network Camera is placed
in indoor environments.
(2) "outdoor"
This option is usually selected when the Network Camera is placed
in outdoor environments.
4. "Power freq."
Select 50 Hz or 60Hz power line frequency.
※
The fluorescent light will flash according to the power line frequency that
depends on local utility. Change the frequency setting to eliminate uncomfortable
flash image when the light source is only fluorescent light.

Video Setting

1. "Contrast"
Adjust the image contrast level, which ranges from -5 to +5. The default
value is set to 0.
2. "Brightness"
Adjust the image brightness level, which ranges from -5 to +5. The
default value is set to 0.
3. "Saturation"
Adjust the image saturation level, which ranges from -5 to +5. The
default value is set to 0.
4. "Sharpness"
Adjust the image sharpness level, which ranges from -5 to +5. The
default value is set to 0.
"EV" Exposure value represent the expected target value of the luminance of
5.
the weighting result of AE windows in the image and its tolerance as offset.
"Gain" In the slide bar of Gain, there are also two sliders, which represent the
6.
limitations to control the maximum gain value and the minimum one, respectively.
Normally, the minimum value is to 1x for better quality.
Infrared Led Setting
1. "Infrared LED Control"
the built-in IR led. This function is very useful under low illumination environment.
(1) "Auto"
Select IR sensitivity from 0 to 4.
(2) "Manual"
Turn on/off the IR led manually.
- "Turn on"
- "Turn off"
2. "Low lux mode" The video quality will be improved when the camera is in low
lux environment.
(1) "Disable dark mode"
(2) "Enable dark mode"

Audio Setting

1. "Mute"
Audio mute.
2. "Microphone " Internal microphone.
3. "Mic Volume"
Adjust microphone volume, which ranges from 1 to 64.
IR led for Day and Night (Option). User can turn on/off
Turn on led
Turn off led
Disable low lux mode.
Enable low lux mode.
26/59