Operation - Electralog DF2006 User Manual

risk of fire, electric shock or injury to persons, always use a licensed
electrician
1. Make sure the units MAIN ON/OFF switch is switched OFF (refer to
operating instruction section).
2. Plug the unit into a 15Amp/120VAC outlet. If the cord does not
reach, you may use a No. 16 AWG minimum size extension cord
rated for a minimum of 1875 watts.
ManTel InsTallaTIOn
For use with a new or existing mantel, insert fireplace as shown in
FIGURE 7 and anchor in place with supplied screws.

OPeraTIOn

To access the controls, swing down the front cover panel located on the
lower front of the fireplace (refer to diagram below). (FIGURE 8)
FIGURE 8
www.sylvane.com 1-800-934-9194
x6
FIGURE 7
6