Glass Cleaning - Electralog DF2006 User Manual

FIGURE 10
Light
Bulbs
Screws

Glass CleanInG

The glass is cleaned in the factory during the assembly operation.
During shipment, installation, handling, etc., the front glass panel may
collect dust particles; these can be removed by dusting lightly with a
clean dry cloth.
To remove fingerprints or other marks, the front glass panel can be
cleaned with a damp cloth. The front glass panel should be completely
dried with a lint free cloth to prevent water spots. To prevent scratching,
do not use abrasive cleaners or spray liquids on the clear door surface.
COMPaCT FIrePlaCe sUrFaCe CleanInG
Use warm water only to clean painted surfaces of the Compact
Fireplace. Do not use abrasive cleaners.
serVICInG
Except for light bulb replacement and cleaning described above, an
authorized service representative should perform any other servicing.
www.sylvane.com 1-800-934-9194
Light Access
Cover
10