Operation - Electralog 20" Compact Owner's Manual

Installation
Fireplace Installation
1. Make sure the unit's 3-Posi-
tion switch is switched OFF
(refer to operating instruction
section).
2. Plug the unit into a 15 Amp,
120 VAC outlet.
Wiring
L1
N

Operation

WARNING: This electric
firebox must be properly installed
before it is used.
Manual Controls
To access the controls, swing
down the front cover panel
located on the lower front of the
fireplace. (Figure 2)
A. 3- Position Switch
The switch has two ON positions
marked with
"Manual" position is for manual
operation. In this position the
8
N
L
CUTOUT
and "Manual".
BLOWER
MOTOR
M
ELEMENT
THERMOSTAT
built-in remote control is by-
passed.
The position is for operating the
unit with the provided remote con-
trol. When in
is operated with the ON and OFF
buttons of the remote control.
When the switch is in the center
position the unit is off.
B. Heater ON/OFF Switch
The
The Heater ON/OFF Switch sup-
plies power to the heater fan and
the heater element. When the
LIGHT HARNESS
ASSEMBLY
M
FLICKER
MOTOR
position, the unit
www.dimplex.com