Expand Your Network With The Pla - ZyXEL Communications PLA series User Manual

Table 3 LEDs: 500 and 600 Mbps Models
LIGHTS
POWER
HomePlug
ETHERNET

1.3 Expand Your Network with the PLA

The PLA plugs into an ordinary power outlet to easily extend a cable or DSL broadband connection
or existing Ethernet (LAN) network to any other electrical outlet in any room of a house, all without
the need for any new cabling. Devices can securely communicate with each other at high data
PLA Series User's Guide
ICON COLOR STATUS
Green On
Blinking
Off
Green On
Amber
Red
Green/ Blinking
Amber/
Red
Off
Green On
Blinking
Off
DESCRIPTION
The PLA is on and receiving power.
It also indicates a successful connection using the RESET/
ENCRYPT button.
The PLA is starting up.
It also indicates the PLA is trying to connect with another
device using the ENCRYPT function.
The Power LED blinks when it is in standby mode. Refer to
Section 2.3 on page 16 for details on this feature.
The PLA is not receiving power.
The PLA detects another powerline adapter. The data transfer
rate is greater than 80 Mbps.
The PLA detects another powerline adapter. The data transfer
rate is between 20~80 Mbps.
The PLA detects another powerline adapter. The data transfer
rate is between 0~20 Mbps.
The PLA is communicating with another powerline adapter.
Data is being transmitted and/or received.
The HomePlug port does not detect another powerline
adapter.
The ETHERNET port is on and ready and the PLA detects a
device connected to it.
The PLA is communicating with a networking device
connected to it.
The PLA does not detect any devices connected to its
ETHERNET port.
Chapter 1 Introducing the PLA
9