Table of Contents
Advertisement
BIOS SETTING
Boot Menu
41
Set Supervisor Password
A supervisor password must be set before a lower-level user password can be set. After selecting
Change Supervisor Password, press Enter. You will be prompted for the new password, and then
again to verify it. Type in 6 or fewer keystrokes. If you make an error, press Esc to start over.
Set User Password
With a User password, you can enter the Setup Utility and change or remove the User password, but
you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette
access if it has been disabled.
Advertisement
Table of Contents
