Table of Contents
Advertisement
Starting the BIOS Setup Utility
You can only enter the BIOS setup utility as the computer is booting, that is between the time you turn
on the computer and before the Windows interface appears. If your computer is already on, shut down
your computer completely (power off) and restart it and then press the F2 key to enter the setup utility.
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter information:
Enter
F1
- / +
F9
F10
ESC
Users are allowed to enter new values to replace the default settings in certain fields, and the rest
fields are specified by system default parameters and cannot be modified by users. Reverse the
attribute of the main options and press the Enter key to enter into the submenu. Press the Esc key to
return to the previous configuration page.
Select Menu
Select Item
Execute Command
Help
Change Values
Setup Defaults
Save and Exit
Exit
BIOS SETTING
35
Advertisement
Table of Contents
