Bios Setup - Gigabyte W431U User Manual

3.2 BIOS Setup

The BIOS setup utility allows you to configure your computer's ba-
sic settings. When you turn your computer on, the system reads
this information to initialize the hardware so that it can operate cor-
rectly. Use the BIOS setup utility to change your computer's start-
up configuration.
You can only enter the BIOS setup utility as the computer is boot-
ing, that is between the time you turn on the computer and before
the Windows interface appears. If your computer is already on, shut
down your computer completely (power off) and restart it and then
press the F2 to enter the setup utility.
►Navigating and Entering Information in BIOS◄
Use the following keys to move between fields and to enter infor-
mation:
Item Description
←→ Select Tab
Push the up and down arrow keys to move
↑↓ among selections, then press Enter to make
a selection.
Change option or you can use F5/F6 to
+ -
change values.
Tab Select Field.
F1 General Help.
F10 Save and Exit.
Press Esc to exit any section. If you wish to
ESC exit the BIOS utility without saving changes,
go to the main menu, then press Esc.
Users are allowed to enter new values to replace the default set-
tings in certain fields, and the rest fields are specified by system
default parameters and cannot be modified by users. Reverse the
attribute of the main options and press the Enter key to enter into
the submenu. Press the Esc key to return to the previous configu-
ration page.
►BIOS Info◄
PhoenixBIOS Setup Utility
Info Main Advanced
BIOS Version: 3B11
VGA BIOS Version: Alviso 1214
KBC Version: 1A21
CPU Type: Intel(R) Pentium(R) M processor
CPU Speed: 2133MHz
Total Memory: 512MB (Single Channel Mode)
Slot 1 Memory: 512MB
Slot 2 Memory: 0MB
Serial Number: RW3TFCCAL522002
UUID 003A58C2E4630010848200C09FA2F6DB
F1 Help   Select Item F5/F6
ESC Exit  Select Menu Enter
17
W431U NOTEBOOK USER'S MANUAL
Security Boot Exit
Change Values F9 Setup Defaults
SelectSub-menu F10 Save and Ext