Related Manuals for Neo Car Audio Neo Changer
Summary of Contents for Neo Car Audio Neo Changer
-
Page 1: Instruction Manual
Instruction Manual Sales Office Neo Car Audio 9235 Trade Place Suite H San Diego, CA 92126 www.neocaraudio.com Phone/Fax 858-689-4141 Neo Car Audio v.1.5.A All Rights Reserved... -
Page 2: Table Of Contents
T able of Contents C H A P T E R Installation Preparation (All Vehicles) Anti-Vibration Setup Load/Unload Magazine C H A P T E R Dip-Switch Overview (REQUIRED) Acura Audi Ford (Ford, Lincoln, Mercury) GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) 9-11 Chrysler (Jeep, Dodge, Plymouth, Eagle) 12... -
Page 3: Installation Preparation (All Vehicles)
Neo Changer, it must be read by all users. Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in. -
Page 4: Anti-Vibration Setup
P R E P A R A T I O N First Step (For All Vehicles) The first and most important step in using the Neo Changer is setting the dip-switches on the black box; this makes the changer compatible with the vehicle it is being installed in. -
Page 5: Load/Unload Magazine
The CD changer is designed to play commercially pressed 12cm audio CD’s only. Some recordable CD’s may not function correctly when used in the Neo Changer. Irregular shaped CD’s should never be used. The best recordable CD’s to use with the changer are those with a blue bottom. -
Page 6: Dip-Switch Overview (Required)
(required). The black box included with your Neo Changer is what connects the changer to your vehicles factory car stereo. This black box connects to the Neo Changer, and to the specific cable needed for your car. -
Page 7: Acura
10 discs in the magazine, but the readout will be wrong. This is not a technical problem; the car stereo was designed for no more than six discs. Switch to the Neo Changer by pressing the CD button on the radio. This step O P E R A T I O N may take up to three minutes. -
Page 8: Audi
§ Audi A8 (2003-2004) – Not Compatible. § Audi A6 (2004) – Not Compatible. Once you connect the Neo Changer, turn on your radio. A CD icon will appear on the display of your radio showing that the Neo Changer is ready to use. This step may take up to three minutes. -
Page 9: Ford (Ford, Lincoln, Mercury)
Please use only the first six slots in the CD magazine. After setting the dip switches connect the Neo Changer directly to the radio using the Ford 12-pin cable. To change discs simply press the disc number. - Page 10 V E H I C L E I N S T A L L A T I O N Model Year(s) Changer Location and notes Model Year(s) Changer Location and Notes Ford Continental 1998-2004 20-Pin connector at headunit. 16-Pin connector at headunit. Crown Victoria 1995-1997 Premium Audio System...
-
Page 11: Oldsmobile, Pontiac, Saturn)
GM (Buick, Cadillac, Chevy, GMC, Pontiac, Saturn) *PLEASE READ* *1995-1999 Radios with built in CD player (Except Corvette) are NOT compatible with the Neo Changer. *2000-2004 Radios with built in CD player ARE compatible. Separate OEM CD (1995-2004) or OEM Cassette (2000-2004) must be disconnected to use the Neo Changer. - Page 12 V E H I C L E I N S T A L L A T I O N Chevrolet - continue Model Year(s) Changer Location and Notes Notes for Buick: GM-C Cable behind Headunit Buick Requires GM factory CD data cable part Equinox 2005 Protocol: XM...
- Page 13 C L A S S To change tracks simply press “Seek <” or “Seek >” Switch to the Neo Changer by pressing the “Band” button, until you see XM1. O P E R A T I O N The screen will change to D1 T1 ( Disc 1, Track 1) F O R Cars using GM-C cable can change disc by turning “P-TYPE”...
-
Page 14: Chrysler (Jeep, Dodge, Plymouth, Eagle)
“1”. If you see it, it means that your radio can control the Neo Changer. Before connecting any cables you must set the dip switch box to the position listed for your vehicle. If you set the dip-switches after you have connected cables to the box, you must disconnect and reconnect them for the changer to operate. -
Page 15: Honda
F O R H O N D A All 1992-2004 Honda’s are compatible with the Neo Changer except the 2003 and 2004 Honda Accord and all Honda Element vehicles. Some radio models require pressing “Seek >” once to start playing after changing CD or after startup. -
Page 16: Toyota
Toyota dealerships, it is part #08695-00370. Some radio models require pressing “Seek >” once to start playing after changing CD or after startup. Switch to the Neo Changer by pressing the “CD” button. O P E R A T I O N Follow the LCD readout instructions to change CD’s and tracks. -
Page 17: Volkswagen
VW front cable. VW prewired cable to trunk is not always shielded and can cause noise from the changers datalines. Switch to the Neo Changer by pressing the “CD” button on O P E R A T I O N the radio. -
Page 18: Troubleshooting
Ground. ( Only on some the yellow and black cable to models) power and ground Neo Changer suddenly is not Bad connector or power Unplug the black converter recognized any more discharge box from Radio and plug... -
Page 19: Warranty/Warnings
Notices, Warnings, and Warranty Info One Year Limited Warranty The quality controls used in the manufacture of this product ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by SSI authorized personnel, is found to have failed in normal use due to defects in material or workmanship. -
Page 20: Fcc And Legal Information
1. Use of headphones while operating an automobile or moving vehicle is not recommended and is unlawful in some countries and areas. 2. Be careful and attentive on the road. Stop operation of the Neo Changer if you find it disruptive or distracting while driving. The driver of a motor vehicle should not operate the Neo Changer while driving. -
Page 21: Ford Appendix
FORD Appendix Neo Changer Connection 2004 - Town Car, Grand Marquis, Marauder, LS and Ford Crown Vic. 1. Preparing the Neo Ford-12pin Cable Take the Neo Ford 12pin cable and cut off the black 12-pin harness. You will use only the cable and big White 22 pin connector (connects to the black box). -
Page 22: Corvette Appendix
GM – Corvette Appendix Neo Changer Connection to Chevrolet Corvette Most Corvettes are pre-wired to the trunk. In case you can’t find the connector in the trunk, please do the following: 1. Preparing the Neo GM-A Cable Take the Neo GM-A cable and cut off the Black and Red harness, you will then have two cables in your hands.
Need help?
Do you have a question about the Neo Changer and is the answer not in the manual?
Questions and answers