Table of Contents
Advertisement
GA-3CCWV-RH Motherboard
Legacy Diskette A
This category identifies the type of floppy disk drive A that has been installed in the computer.
Disabled
360KB, 5
in.
1/4
1.2MB, 3
in.
1/2
720K, 3
in.
1/2
1.44M, 3
in.
1/2
2.88M, 3
in.
1/2
Note: The 1.25MB,3
reference a 1024 byte/sector Japanese media format. The 1.25MB,3
1/2
diskette requires 3-Mode floppy-disk drive.
Primary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the
computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type
which will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
TYPE
1-39: Predefined types.
Users: Set parameters by User.
Auto: Set parameters automatically. (Default setting)
CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD parameters
automatically.
ATAPI Removable: Removable disk drive is installed here.
Disable this device.
3
inch AT-type high-density drive; 360K byte capacity
1/2
3
inch AT-type high-density drive; 1.2M byte capacity
1/2
3
inch double-sided drive; 720K byte capacity
1/2
3
inch double-sided drive; 1.44M byte capacity.
1/2
3
inch double-sided drive; 2.88M byte capacity.
1/2
3 8
1/2
Advertisement
Table of Contents
