Gigabyte GA-3CCWV-RH User Manual page 25

14 ) F_Panel (2X10 Pins Front Panel connector)
Please connect the power LED, PC speaker, reset switch and power switch of your chassis
front panel to the F_PANEL connector according to the pin assignment above.
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RES (Reset Switch)
PW (Soft Power Connector)
MSG(Message LED/Power/
Sleep LED)
NC
IDE Hard Disk
Active LED
Reset Switch
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
2 5
Connector Introduction
Message LED/Power/Sleep
LED
1 2
HD+
MSG+
HD- MSG-
RSE+ PW+
Soft Power
PW-
RSE-
Connector
NC
SPK+
SPK-
19 20
Speaker
Connector