Twinax Address Note; Note - Axis 14363 User Manual

Section 5: Configuration Parameters
Twinax Address Twinax Address.............................................................. [Device Address]

Note:

This option is not found in the utility program but only in the
Lexmark frontpanel menu !
This option selects the device address. This address should be determined
by the system administrator before the AFP IOP is connected to the
system. The address can be in the range from 0-6.
• 0 [0..6]
IPDS Parser syntax (with default setting):
TWINAX_ADDRESS = 0;
AXIS AFP IOP User's Manual 37