Table of Contents
Advertisement
Section 5: Configuration Parameters
Coax/Twinax
Options Front
Panel Menus
22
The detected cable type (Coax or Twinax) is displayed in the upper left
corner of the AFP IOP frontpanel menu. However if no cable is
connected, the display will always indicate "Twinax". Only the menu
corresponding to the detected cable will be accessible. However two
options share the same position in the configuration storage area. These
options are:
Coax Option:
C04 Country Code
Twinax Option:
C01 Country Code
This means if Coax option "C04" is changed then the Twinax option
"C01" is changed accordingly. Examples of the menus are shown in
figures 4 and 5.
Figure 4.
Figure 5.
C03 APO
C04 Country Code
C05 Reserved
More
Ready
C04 Country Code
up
[@1-USA/Canada ]
Down
2-Reserved
Save
Ready
Return
Return
AXIS AFP IOP User's Manual
Advertisement
Table of Contents
