1. Manuals
  2. Brands
  3. Axis Manuals
  4. Printer Accessories
  5. 14363
  6. User manual

Axis 14363 User Manual

Axis afp iop printer interface
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Preface

About Axis

Network CD-
ROM Servers
Network Print
Servers
IBM Mainframe
and S/3x – AS/400
Printer Interfaces
AXIS AFP IOP User's Manual
Thank you for purchasing the AXIS AFP IOP Printer Interface. Our goal
in developing this product is to enable you to connect your Lexmark
Optra series of printers or the 4039 series of printer to your IBM IPDS
environment, allowing you to take full advantage of both the IPDS
functions and your printer capabilities.
Axis Communications, founded in 1984, is one of the world's fastest
growing companies in the printer interface and network print server
market. The head quarters are located in Lund, Sweden, with subsidiaries
in Boston, Tokyo, and Hong Kong.
Axis Communications has a distributor network operating in more than
60 countries world-wide, marketing three product lines:
CD-ROM servers provide a flexible and cost-efficient solution for sharing
CD-ROMs across the network. They are available in Ethernet (AXIS 850/
851) and Token Ring (AXIS 950/951) versions, with or without built in
drive option.
These intelligent Ethernet and Token Ring print servers support a wide
range of LAN protocols. The AXIS NPS 530, 532, 550 and AXIS 150 are
Ethernet print servers, and the AXIS NPS 630, 632 and 650 are Token
Ring print servers.
These products include a wide range of plug-in interfaces and free standing
box products such as the Cobra+ and the AFP IPDS-to-PostScript
converter.
AXIS AFP IOP User's Manual
Part No: 14363
Copyright © Axis Communications AB, 1995
Revision 1.0
Dated: October 1995
i

Advertisement

Table of Contents
loading

Related Manuals for Axis 14363

Summary of Contents for Axis 14363

  • Page 1: About Axis

    These intelligent Ethernet and Token Ring print servers support a wide Servers range of LAN protocols. The AXIS NPS 530, 532, 550 and AXIS 150 are Ethernet print servers, and the AXIS NPS 630, 632 and 650 are Token Ring print servers.

  • Page 2: About This Manual

    This manual will guide you through a simple step-by-step installation and setup procedure. It is divided into six sections: General About the AXIS AFP IOP Printer Interface, how it works, where to use it, Information and its main features. Front Panel How to operate the Lexmark printer’s front panel when the AXIS AFP...

  • Page 3: Trademark Acknowledgements

    EN55022/1987, and the requirements for immunity according to EN50082-1/1992 residential, commercial, and light industry. (Compliance is not valid for unshielded network and printer cables.) Trademark acknowledgements Lexmark, Optra, PCL and IBM are registered trademarks of the respective holders. AXIS AFP IOP User’s Manual...
  • Page 4 AXIS AFP IOP User’s Manual...

  • Page 5: Table Of Contents

    The Lexmark IOP Port AFP IOP Serial I/O Port 2 Front Panel Operation AFP IOP menus Opening Screen (Main IOP Menu) Local Setup Menu 3 Utility Program Operation Setup for PC Configuration Handling Config Files AXIS AFP IOP User’s Manual...

  • Page 6: Example

    Making Changes to Config File Options Save Config File (to PC harddisk/floppy drive) 4 IPDS Parser Function Using the IPDS Parser Syntax Example 1 Example 2 Option strings 5 Configuration Parameters Coax/Twinax Options Front Panel Menus Coax Options Note: AXIS AFP IOP User’s Manual...
  • Page 7 Manual Feed Support Envelope Feed Support Skip Blank Pages Interface Release Time Out Error Beep Control Full Page Printing Test Page IPDS Options Front Panel Menu IPDS Options Note: IPDS Emulation Codepage Version IPDS Exception Reporting Control AXIS AFP IOP User’s Manual...
  • Page 8 IBM 3812 Emulation Fonts (240 dpi) IBM 4028 Emulation Fonts (300 dpi) C Technical Specifications Printers supported Physical attachments Attachments Emulations IPDS Features Supported IPDS Fonts General Hardware Features Examples of supported software Product Certificates Safety Environment viii AXIS AFP IOP User’s Manual...
  • Page 9 D IBM Cabling System E Installation Installation on Lexmark Optra and 4039 F How to contact Axis Internet and World Wide Web The Axis offices G Related Publications H Cable Specifications Index AXIS AFP IOP User’s Manual...
  • Page 10 AXIS AFP IOP User’s Manual...

  • Page 11: General Information

    • Best performance is obtained by using the Lexmark Optra series, which is built around a new Graphics Engine based on an object oriented design. The AXIS AFP IOP creates an HP PCL5 raster image for each page to ensure 100% compatibility with the AFP architecture, and the new Graphics enterpreter of the Lexmark Plus series can maintain full printspeed during processing of complex graphics jobs.

  • Page 12: Contents Of This Delivery

    1 x Serial link cable (Part no: 14387). The cable is for option configuration and software upgrade of the AXIS AFP IOP through the PC utility program. The Serial link cable connects to the interface via the same 9 pole connector as the Coax and Twinax patch cables.

  • Page 13: Ipds

    (4028 emulation) and 35 resident 240 dpi fonts (3812 emulation). The fonts are functionally equivalent to the standard IBM 4028 AS1/NS1 and the IBM 3812 Model 2 fonts. Refer to Appendix B IPDS Font Summary for a full listing of the resident fonts. AXIS AFP IOP User’s Manual...

  • Page 14: The Lexmark Iop Port

    The serial I/O port can also be used as a trace output port for dumping system data sent from the HOST onto a serial attached PC. Contact your local dealer/distributor for more information. AXIS AFP IOP User’s Manual...

  • Page 15: Front Panel Operation

    The Optra front panel will not indicate the presence of the AFP IOP when it is Online (Ready). When printing from the AFP IOP the frontpanel will display "AXIS AFP"(Only on Optra and 4039 Plus printers) and "NET" as the source, instead of parallel or serial.

  • Page 16: Opening Screen (Main Iop Menu)

    The "D" indication will also be displayed in 4028 emulation, even though an original IBM 4028 does not support duplex (The AFP IOP can print IPDS duplex in all emulations). Coax Local Setup Remote Setup Test Options 3816D Ready Return Figure 1. AXIS AFP IOP User’s Manual...
  • Page 17 Twinax Station Address. This indication is only shown in Twinax mode. For more information on setting the Twinax address refer to page 37. Twinax Local Setup Remote Setup Test Options 4028 [2] Ready Return Figure 2. AXIS AFP IOP User’s Manual...

  • Page 18: Local Setup Menu

    For more information on the [Remote Setup] refer to page 57. For more information on [Test Options] refer to page 60 and page 66. For more information on the [Trace Facility], contact your local dealer/ distributor. AXIS AFP IOP User’s Manual...

  • Page 19: Utility Program Operation

    The program is started from the DOS prompt and will present itself with the opening screen. (The same window is displayed when selecting the menu [Info]) Note: The online help screens can be accessed anytime during program operation by pressing the <F1> key. AXIS AFP IOP User’s Manual...

  • Page 20: Setup For Pc Configuration

    Section 3: Utility Program Operation Setup for PC Configuration To configure or upgrade the AXIS AFP IOP using the AFP utility program, the PC must be connected to the printer. Follow these steps: Important 1. Switch off both the PC and the printer! 2.

  • Page 21: Making Changes To Config File Options

    Note that the printer will display an error message after a while as the interface only communicates with the serial port and not with the IOP port. This does not affect the download. AXIS AFP IOP User’s Manual...

  • Page 22: Save Config File (To Pc Harddisk/Floppy Drive)

    Use <TAB> to select Accept and press <ENTER> or use the mouse to click on [Accept] to keep the changes. AXIS AFP IOP User’s Manual...

  • Page 23: Ipds Parser Function

    Syntax To activate configuration mode, send the following lead-in string: &%OPT_=; To end configuration mode, send the following trailer string: &% This causes changed options to be saved. Turn the printer Off and On to AXIS AFP IOP User’s Manual...

  • Page 24: Example 2

    FRONT_TOP_MARGIN = -100; &% Example 2 &%OPT_=;COAX_C04=5;COAX_C17=1;&% Note Turn the printer Off and On to activate the new options. Option strings All supported parameters, their option strings and valid numbers are listed in the section Configuration Parameters. AXIS AFP-IOP User’s Manual...

  • Page 25: Configuration Parameters

    The parameters are split into the following groups: Coax and Twinax Options Printer Options IPDS Options Set Factory default Each chapter is introduced by a short presentation of some important features of the corresponding Lexmark menu. AXIS AFP IOP User’s Manual...

  • Page 26: Coax/Twinax Options Front Panel Menus

    "C01" is changed accordingly. Examples of the menus are shown in figures 4 and 5. C03 APO C04 Country Code C05 Reserved More Ready Return Figure 4. C04 Country Code [@1-USA/Canada ] Down 2-Reserved Save Ready Return Figure 5. AXIS AFP IOP User’s Manual...

  • Page 27: Coax Options

    • 0 [COR] Printing using landscape orientation and a reduction of the output to around 70%. 1 [Portrait] Portrait mode. No reduction. 2 [Landscape] Landscape mode. No reduction. IPDS Parser syntax (with default setting): COAX_C01 = 0; AXIS AFP IOP User’s Manual...

  • Page 28: C02

    (The table is continued on next page.) [0-Intern.set5] International Set 5 • 1 [1-USA/Canada USA/Canada - English [2-Reserved ] Reserved [3-Reserved ] Reserved [4-Can.French ] Canadian French [5-Aus/Germany] Austria/Germany [6-Belgium Belgium [7-Brazil Brazil [8-Denmark/Nor] Denmark/Norway [9-Finland/Swe] Finland/Sweden AXIS AFP IOP User’s Manual...
  • Page 29 [37-Turk(1026)] 1026 Turkish [38-Reserved ] Reserved [39-Turk (905)] Turkish [40-Latin 2] Latin 2 [41-Greek (423)] Greek [42-Greek (875)] Greek (The table is continued from previous page.) IPDS Parser syntax (with default setting): COAX_C04 = 1; AXIS AFP IOP User’s Manual...

  • Page 30: C06

    In DSC/DSE modes this setting cannot be overwritten. • 0 [6 LPI] 6 LPI(8.57 LPI when COR active) 1 [8 LPI] 8 LPI(11.43 LPI when COR active) 2 [6.5 LPI] 6.5 LPI IPDS Parser syntax (with default setting): COAX_C09 = 0; AXIS AFP IOP User’s Manual...

  • Page 31: C10

    12-pitch Prestige (15-pitch, Gothic-text when COR active). 2 =[15 CPI] 15-pitch Gothic-text (20-pitch, Gothic-text when COR active). 3 =[17 CPI] 17-pitch Courier (27-pitch, Gothic-text when COR active). IPDS Parser syntax (with default setting): COAX_C12 = 0; AXIS AFP IOP User’s Manual...

  • Page 32: C13

    Paper size, C01, C02 and C03 are used to determine the maximum page width. The range is 0..999. The normal value for this field is 132. • 132 [0..999] IPDS Parser syntax (with default setting): COAX_C14 = 132; AXIS AFP IOP User’s Manual...

  • Page 33: C15

    The setting of C24 controls how the printer handles the end of a print-order. 1 [Auto Function] Form feed is executed after the print buffer has completed a local copy job. IPDS Parser syntax (with default setting): COAX_C16 = 0; AXIS AFP IOP User’s Manual...

  • Page 34: C17

    Yes. When New Line is executed at MPP+1, then an extra New Line is executed. New print position is at the beginning of the line which follows the next line. Used in DSC/DSE modes only. IPDS Parser syntax (with default setting): COAX_C19 = 1; AXIS AFP IOP User’s Manual...

  • Page 35: C20

    • 0 [Pos1 & MPP+1] No. Execute FF only if it occurs first on the line or at the MPP+1 position. 1 [Whenever] Yes. Execute FF always. IPDS Parser syntax (with default setting): COAX_C23 = 0; AXIS AFP IOP User’s Manual...

  • Page 36: C24

    Use this option to increase the top margin in all non-IPDS Coax modes. The value must be specified in 1/100 inches. The range is 0..999. • 0 [0..999] IPDS Parser syntax (with default setting): COAX_C26 = 0; AXIS AFP IOP User’s Manual...

  • Page 37: C27

    Release Time Out will always have higher priority if C28 has a value equal to or higher than the Release Time Out. The range is from 15-255 seconds. • 30 [15..255] Coax Time Out IPDS Parser syntax (with default setting): COAX_C28 = 30; AXIS AFP IOP User’s Manual...

  • Page 38: C29

    Whole page. Logical page is equal to the paper size. 2 [Compress] Compressed line spacing. Line spacing is reduced so lines close to the paper edge can be printed without clipping. IPDS Parser syntax (with default setting): COAX_C30 = 0; AXIS AFP IOP User’s Manual...

  • Page 39: Twinax Options

    [9-Finland/Swe] Finland/Sweden [10-Italy Italy [11-Japan/Engl] Japan-English [12-Portugal ] Portugal [13-Span.speak] Spanish-Speaking [14-UK United Kingdom [15-Aus/Ger .2] Alternate Austria/Germany [16-Den/Nor .2] Alternate Denmark/Norway [17-Fin/Swe .2] Alternate Finland/Sweden [18-Spain .2] Alternate Spain [19-Japan/Kata] Japan-Katakana [20-APL (293) ] AXIS AFP IOP User’s Manual...

  • Page 40: C02

    If this feature is enabled for a particular tray then the tray linking will skip this tray, even though the paper type installed is the same as for the other tray. Refer to the Lexmark User manuals for more information. AXIS AFP IOP User’s Manual...

  • Page 41: Twinax Address Note

    This option selects the device address. This address should be determined by the system administrator before the AFP IOP is connected to the system. The address can be in the range from 0-6. • 0 [0..6] IPDS Parser syntax (with default setting): TWINAX_ADDRESS = 0; AXIS AFP IOP User’s Manual...

  • Page 42: Printer Option Front Panel Menu

    6 shows a negative adjustment of 1/30", i.e. all print data coming from the AFP IOP will be printed with this displacement. However the negative adjustment might cause the top area of the printout to be truncated. AXIS AFP IOP User’s Manual...
  • Page 43 Lexmark engine, and therefore has a similar reduced printable area, for which most applications have compensation. For more information on logical page areas, refer to the Lexmark "Technical Reference" under "PCL5 Emulation Printable and Unprintable Areas". AXIS AFP IOP User’s Manual...

  • Page 44: Printer Options

    Left margin can be adjusted in 1/300 of an inch, and a range of -128 to 127 units is allowed. Left margin is always located at the edge of the paper to the left of the leading edge. • 0 [-128..+127] IPDS Parser syntax (with default setting): FRONT_LEFT_MARGIN = 0; AXIS AFP IOP User’s Manual...

  • Page 45: Top Margin Back Side

    Envelope Top margin must be in the range -128 to 127. Unit is 1/300 of an inch. Negative values indicate less top margin. • 0 [-128..+127] IPDS Parser syntax (with default setting): ENVELOPE_TOP_MARGIN = 0; AXIS AFP IOP User’s Manual...

  • Page 46: Left Margin Envelope

    With a value of zero, automatic cassette detection will take place. • 0 [Autodetect] Auto detect (Optra and 4039 Plus series only). 1 [One] One cassette 2 [Two] Two trays IPDS Parser syntax (with default setting): NUMBER_OF_CASSETTES = 0; AXIS AFP IOP User’s Manual...

  • Page 47: Cassette Function

    Inverted mode. Top cassette is alternate, bottom is primary. 2 [1.Prim & Alt.] The top cassette will always be used. 3 [2.Prim & Alt.] The bottom cassette will always be used. IPDS Parser syntax (with default setting): CASSETTE_FUNCTIONS = 0; AXIS AFP IOP User’s Manual...

  • Page 48: Paper Size, Top Cassette

    3.875 x 7.5 inch 9 [Com-10] COM10 4.125 x 9.5 inch 10 [DL] 4.33 x 8.66 inch 11 [C5] 6.38 x 9.01 inch 12 [A5] 5.83 x 8.27 inch IPDS Parser syntax (with default setting): PAPER_SIZE_1ST_CASSETTE = 0; AXIS AFP IOP User’s Manual...

  • Page 49: Paper Size, Bottom Tray

    4.125 x 9.5 inch 10 [DL] 4.33 x 8.66 inch 11 [C5] 6.38 x 9.01 inch 12 [A5] 5.83 x 8.27 inch 13 [Com-9] COM9 3.875 x 8.875 inch IPDS Parser syntax (with default setting): PAPER_SIZE_2ND_CASSETTE = 0; AXIS AFP IOP User’s Manual...

  • Page 50: Paper Size, Manual Feed

    4.125 x 9.5 inch 10 [DL] 4.33 x 8.66 inch 11 [C5] 6.38 x 9.01 inch 12 [A5] 5.83 x 8.27 inch 13 [Com-9] COM9 3.875 x 8.875 inch IPDS Parser syntax (with default setting): PAPER_SIZE_2ND_CASSETTE = 1; AXIS AFP IOP User’s Manual...

  • Page 51: Paper Size, Envelope Feed

    This option is used to enable manual feed support.The standard logical page number for manual feed (63H) can be used in the IPDS to select the manual feed. • 0 [No] 1 [Yes] IPDS Parser syntax (with default setting): MANUAL_CASSETTE_ENABLE = 0; AXIS AFP IOP User’s Manual...

  • Page 52: Envelope Feed Support

    When setting the Skip blank page option to 1, all completely blank pages are not printed. • 0 [No] Print blank pages 1 [Yes] Skip blank pages IPDS Parser syntax (with default setting): BLANK_PAGE_SKIP = 0; AXIS AFP IOP User’s Manual...

  • Page 53: Interface Release Time Out

    Appendix F - Customer Support. • 0 [No] No beep. 1 [On] Burst of 6 beeps on user errors. 2 [Continous] Beep while error persists. IPDS Parser syntax (with default setting): ERROR_BEEP = 0; AXIS AFP IOP User’s Manual...

  • Page 54: Full Page Printing

    IPDS Parser syntax (with default setting): TEST_PAGE = 0; Note: The frontpanel menu [Test Page] has as an additional item: [Continuous Test Page]. This value can only be selected from the front panel as it is disabled at power OFF. AXIS AFP IOP User’s Manual...

  • Page 55: Ipds Options Front Panel Menu

    (only) and reported to the host. The "D" indication in the AFP IOP main menu will be displayed if the duplex is automatically detected or if duplex has been enabled be stating "yes" in the "Duplex Support" option. AXIS AFP IOP User’s Manual...

  • Page 56: Ipds Options

    • 0 [Version 1] Use standard codepage version 1 for codepages close to 37 or 500 (non typographic standard codepages). 1 [Version 0] Special. Use old codepage version 0. IPDS Parser syntax (with default setting): CODEPAGE_VERSION = 0; AXIS AFP IOP User’s Manual...

  • Page 57: Ipds Exception Reporting Control

    The value “1=Printing” only works on Optra and 4039 Plus series printers. A value of 1 on printers other than the 4039 Plus series will result in operation as described under value “2=Transfer”. IPDS Parser syntax (with default setting): INCREMENT_PAGE_COUNTER = 0; AXIS AFP IOP User’s Manual...

  • Page 58: Resource Memory

    This option determines if the AFP IOP should report to the host that this option is installed. • 0 [Autodetect] AUTO Detect (Optra and 4039 Plus series only) 1 [Disable] Duplex not installed. 2 [Enable] Duplex installed. IPDS Parser syntax (with default setting): DUPLEX_PRINT = 0; AXIS AFP IOP User’s Manual...

  • Page 59: 4028 Printable Area

    Supports 4028 Print Page option. This option causes the upper left corner (0,0) of the Logical page to be forced inside the 4028 Print- able area. IPDS Parser syntax (with default setting): 4028_PRINTABLE_AREA = 0; AXIS AFP IOP User’s Manual...

  • Page 60: Set Factory Default

    Press OK buttons simultaneously to restore factory settings... Ready Return Figure 7. When you enter this menu, you will be asked if you really want to restore factory default settings. Note: The current configuration will be overwritten. AXIS AFP IOP User’s Manual...

  • Page 61: Download/Upload Procedure

    Download/Upload Both the configuration, program and fonts can be downloaded to the AXIS AFP IOP interface via the serial cable delivered with the interface. Furthermore the configuration can be uploaded from the AFP IOP. However all configuration settings can be altered from the Lexmark frontpanel as well.
  • Page 62 PC and the Printer use a common ground (not through the serial cable). If not, then connect the devices to a common ground or select a baudrate of 19200 or lower. AXIS AFP IOP User’s Manual...

  • Page 63: Download All

    Download Program (Main AFP IOP Firmware) ....[Remote Setup] Program (Main It is possible to download main program code to the interface using the AFP IOP [Download Program] menu selection (or by selecting [Download All]). Firmware) AXIS AFP IOP User’s Manual...

  • Page 64: Download Font (Resident Font Resources)

    Note that the "fonts" indicated are specific for the emulation currently active. In the example (fig. 11) the font F05-3351 is shown. This is a 4028 font set. The corresponding 3812/16 fontset is called F03-XXXX. The file F07-XXXX indicates the combined file containing both fontfiles. AXIS AFP IOP User’s Manual...
  • Page 65 Section 6: Download/Upload Note The last 4 digits can be different in the three file numbers, e.g. the fontfile for 4028 may be newer than the 3812 fontfile and vice versa. AXIS AFP IOP User’s Manual...
  • Page 66 Section 6: Download/Upload AXIS AFP IOP User’s Manual...

  • Page 67: Program Setup

    19200 or lower. If baud rate is changed after linking with the AFP IOP has been established, the printer has to be restarted and the [Remote Setup] activated before a new download/upload is performed. AXIS AFP IOP User’s Manual...
  • Page 68 Section 7: Program Setup AXIS AFP IOP User’s Manual...

  • Page 69: A Printing A Status Sheet

    Enter [MORE] until [Setup] is displayed. Enter [MORE] until [Net- work Menu X] is displayed. Select this menu by pressing the button next to this menu text. 2. Select [Test Options] and select [Test Page]. 3. Select [Single Testpage]. 4. Press [Ready] to print. AXIS AFP IOP User’s Manual...

  • Page 70: Lexmark Printer Settings Printout

    Appendix A: Printing a Status Sheet Lexmark Printer Settings Printout 1. Enter [MENUS] 2. Enter [MORE] (only on Optra and 4039 Plus models) 3. Enter [TEST MENU] 4. Enter [MORE] 5. Enter [PRINT MENUS]. AXIS AFP IOP User’s Manual...

  • Page 71: B Ipds Font Summary

    66 Gothic-text bold 12 s 66 Serif-text 12 s 68 Serif-text Italic 12 s 69 Serif-text bold 12 s 86 Math-symbol 12 Script 12 Courier 12 Prestige 12 Letter-gothic 12 s 112 Light-Italic 12 AXIS AFP IOP User’s Manual...
  • Page 72 Sonoran serif 10pt 1053(4427/66) Sonoran serif bold 10pt 1056(4535/66) Sonoran serif Italic10pt 1351(4407/78) Sonoran serif 12pt 1653(4427/108) Sonoran serif bold 16pt 2103(4427/162) Sonoran serif bold 24pt b - created by bolding algorithm, s - simulated by substitution AXIS AFP IOP User’s Manual...

  • Page 73: Ibm 4028 Emulation Fonts (300 Dpi)

    Typo Times Roman Bold Ital. PS - Proportional Spaced Typeface, Typo - Typographical Typeface Times Roman is a registered trademark of Linotype AG and/or its subsidiaries. Nimbus Roman is a functional equivalent of Times Roman. AXIS AFP IOP User’s Manual...
  • Page 74 Appendix B: IPDS Font Summary AXIS AFP IOP User’s Manual...

  • Page 75: C Technical Specifications

    • IBM 5294 Remote Controller • IBM 5394 Remote Controller • IBM 5494 Remote Controller Emulations • IBM 3812-2 • IBM 3816-1S • IBM 3816-1D • IBM 4028-NS1 (IBM 3912/16, 3112/16) • IBM 4028-AS1 (IBM 3912/16, 3112/16) AXIS AFP IOP User’s Manual...

  • Page 76: Ipds Features Supported

    GDDM Release 1, Modification 1 DW/370, Release 2 (when used with GDDM) PSF/MVS, Release 2.1 PSF/VM, Release 1.1 • IBM 5250 System/36 Release 5.1 or later System/38 release 8 or later OS/400 Release 2 or later AXIS AFP IOP User’s Manual...

  • Page 77: Product Certificates

    • All safety regulations according to Lexmark Printer Specification. Environment • Temperature: 5 – 40°C / 40 – 105°F • Humidity: 10 - 90% RGH non-condensing. Technical specification information is subject to change without notice. AXIS AFP IOP User’s Manual...
  • Page 78 Appendix C: Technical Specifications AXIS AFP IOP User’s Manual...

  • Page 79: D Ibm Cabling System

    Appendix D IBM Cabling System When using the AXIS AFP IOP on an IBM cabling system, the twinax lines are terminated in the cross field. In this case you will need a dummy twinax plug so that the auto-termination T-cable will not terminate.
  • Page 80 Appendix D: IBM Cabling System AXIS AFP IOP User’s Manual...

  • Page 81: E Installation

    Attach the DC/DC converter to the system board by plugging it into the 5 pole connector at the top right corner of the Lexmark main board. It is recommended to do this before installing the AFP IOP AXIS AFP IOP User’s Manual...
  • Page 82 Fit the holes on the interface to the two white plastic pins on the main board. See figures 13 (4039) and 14 (Optra). Note The plastic pins can be a little tight at first time installation AXIS AFP IOP User’s Manual...
  • Page 83 Appendix E: Installation Network Option Network Card Connector Connector 4039 printer Plastic Posts Holes Figure 13. 4039 printer. AXIS AFP IOP User’s Manual...
  • Page 84 Connector Holes Figure 14. Optra printer. 7. Mount the Screw from the AFP IOP delivery into the the hole on the lower part of the AFP IOP board. See figures 15 (4039) and 16 (Optra). AXIS AFP IOP User’s Manual...
  • Page 85 Appendix E: Installation 4039 printer Figure 15. 4039 printer. AXIS AFP IOP User’s Manual...
  • Page 86 11.Enter the [LOCAL SETUP] menu and select [IPDS OPTIONS]. Select the desired IPDS emulation and press [SAVE]. Press <RETURN> twice and select [TWINAX OPTIONS]. Enter the [C01 Country Code] option and select your national country code. Press [SAVE] and press <RETURN> once. AXIS AFP IOP User’s Manual...
  • Page 87 14.Connect the printer to the host system and power the printer ON. When the printer displays [READY] and the AFP IOP gives a beep sig- nal indicating that the communication processor is ready, the printer is now ready for host data. AXIS AFP IOP User’s Manual...
  • Page 88 Appendix E: Installation AXIS AFP IOP User’s Manual...

  • Page 89: F How To Contact Axis

    Internet and World Wide Web If you are connected to Internet, have a look at the Axis WWW Home Page at http://www.axis.se/. Here you can find information about the company and our products. You can also down-load on-line manuals, tools such as the Acrobat Reader for different platforms, and the latest versions of the software utilities.
  • Page 90 Appendix F: How to contact Axis North & Central Axis Communications Inc. America 4 Constitution Way, Woburn, MA 01801-1030, USA Phone: 1-800-444-AXIS, (617) 938-1188 Fax: (617) 938-6161 Email: info@axisinc.com Japan Axis Communications KK 8th Center Plaza 5F, 1-10-16 Nihombashi Horidome-cho,...

  • Page 91: G Related Publications

    Using the IBM Pageprinter 3812 with an IBM System/36 or S/38 S544-3343 IBM Pageprinter 3812 IPDS Handbook S544-3102 IBM 3812 and 3816 Page Printers Font Reference GA34-2111 The Lexmark 4039 series manuals The Lexmark Optra series manuals AXIS AFP IOP User’s Manual...
  • Page 92 Appendix G: Related Publications AXIS AFP IOP User’s Manual...

  • Page 93: H Cable Specifications

    Appendix H: Cable Specifications Appendix H Cable Specifications Interface Female DB9 Female DB9 Figure 17. AFP IOP Serial Cable Female DB9 Twinax Copper Silver Figure 18. AFP IOP Twinax Cable. AXIS AFP IOP User’s Manual...
  • Page 94 Appendix H: Cable Specifications Coax - Female DB9 Figure 19. AFP IOP Coax Cable. AXIS AFP IOP User’s Manual...

  • Page 95: Index

    World Wide Web Country Character Dynamic Sharing Factory Setting Font Summary IBM 3812 IBM 4028 Front Panel IBM 3270 environment IBM 5250 environment IBM Cabling System Internet IPDS Lexmark Front Panel Primary Casette Print Orientation Product Overview AXIS AFP IOP User’s Manual...

This manual is also suitable for:

Afp iop

Table of Contents