Basic Setup With Axis Netpilot - Axis 5600+ User Manual

Section 5: Setting Up - NetWare
58

Basic Setup with AXIS NetPilot

Starting the
Installation
Follow the instructions available on the AXIS Product CD to install
the AXIS NetPilot software on your computer. AXIS NetPilot runs on
any of these Windows platforms; Windows 3.x, Windows 95,
Windows 98, Windows NT, Windows 2000 or Windows for
Workgroups.
Follow the instructions below to install the AXIS 5600+ with AXIS
NetPilot:
1. Start AXIS NetPilot by double-clicking the NetPilot icon, which
is located in the folder where you installed AXIS NetPilot.
2. Locate the AXIS 5600+ in the 'New Axis Units' folder. Select it
and click the Install button on the AXIS NetPilot toolbar. If your
network is large, it could take a few seconds before the print server
appears in the folder.
Choose the with Installation Wizard option and click OK. The
following screen appears:
The AXIS NetPilot Installation Wizard Main window
AXIS 5600+ User's Manual