KitchenAid KPFD200 User Manual page 48

CLEANING
2. Align the cutout in the piston with the slot on the dispensing
cylinder, and insert the piston into the cylinder. Position the
piston so that the cutout is directly beneath the center of the
cylinder slot.
Slot
3. Place the round end of the dispensing lever through the slot on
the cylinder and into the piston cutout. The dispensing lever
should be positioned so that it angles upwards, towards the
ingredient funnel. Placing the dispensing lever upside-down will
prevent the dispenser from opening fully.
46
FROZEN
THE
DESSERT MAKER
Cutout
4.
Correct Lever Position
Insert the clevis pin through the faceplate tabs and lever. The
lever may have to be moved slightly so the pin can be aligned
with the holes in the lever.
Incorrect Lever Position