Table of Contents
Advertisement
INSTALLATION
1
Adjust car seat to semi-upright position and
armrests to up position.
2
Place forward-facing on vehicle seat.
3
Lift seat pad flap, thread vehicle seat belt
through openings and buckle belt (fig. a).
4
Press down firmly in center of car seat to
compress vehicle seat cushion while tightening
vehicle seat belt.
HINT: Use your knee to press down in center
of car seat (fig. b).
5
Pull front to back and left to right to check for
secure installation (fig. c).
If not secure, see "Vehicle Seat Belts" section.
Attach tether hook (A) to anchor hardware (B)
6
and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available,
see "Installation of Anchor Hardware" section.
Openings
6
(fig. a)
-
with
harness system
(fig. b)
Pull to
tighten
(fig. c)
(A)
(B)
(fig. d)
Advertisement
Table of Contents
