Installation With Base - Century 3-Point Instruction Manual

INSTALLATION
1
Place base rear-facing
2
Thread vehicle lap belt through base belt Tabs
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed under belt Tabs.
3
Press down firmly on base to compress vehicle
seat cushion while tightening vehicle lap belt
(fig. a).
4
Pull front to back and left to right to check for
secure installation (fig. b). Vehicle lap belt
MUST stay tight.
If not secure, see "Vehicle Seat Belts" section.
5
Put car seat in base and pull up on car seat to
be sure it is locked in base.
6
Place child in car seat and check for secure
installation (see
7
Adjust handle to a position behind car seat.
6
WITH
on vehicle seat.
).
4
BASE
8
Check level indicator on base.
Ball MUST be entirely in green zone (fig. c).
If necessary adjust Foot.
NOTE: Vehicle must be on level ground and
child in car seat when leveling.