Advertisement
5. Using the Chronograph
The chronograph function of this watch is able to measure and display elapsed
time up to 59 minutes 59 seconds in 1 second units. After the chronograph dis-
plays elapsed time for 59 minutes 59 seconds, it resumes timing from 0 seconds.
The chronograph minute hand continues to move until the chronograph is stopped
by pressing button (A) even after 59 minutes 59 seconds have elapsed.
Chronograph minute hand
8
Chronograph second hand
Button (A)
18
Button (B)
[Chronograph Timing]
1. Start timing by pressing button (A).
* The chronograph is repeatedly started and stopped by pressing button (A).
2. Pressing button (B) resets the chronograph to 0 seconds.
(A)
Reset
Measurement
[Note]
The chronograph continues to keep time with the chronograph hands until it is
stopped even after 60 minutes have elapsed. Once timing is finished, promptly
press button (A) to stop the chronograph, and then press button (B) to reset it to 0
seconds. If timing is allowed to continue, the battery will continue to wear down
and eventually be depleted causing the watch to stop before the end of the
indicated battery life.
Time
Stop
(A)
(B)
(B)
9
Advertisement
