Multitab Function; Demo Mode - AEG FAVORIT 99009 User Manual

12
Menu

MULTITAB FUNCTION

This function deactivates the flow of
rinse aid and salt. The related indicators
are off.
The programme duration can increase.
Activating the multitab function
Activate or deactivate the multi-
tab function before the start of a
programme. You cannot acti-
vate or deactivate this function
when a programme operates.
1. Open the menu option.
2. Go to Multitab and activate the
multitab function.
3. Press OK to confirm.
4. Press the return touchpad to close
the menu option.
The function stays on until you
deactivate it. Go to menu op-
tion and deactivate the multitab
function.
If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab function.
Submenu
Option guide

Demo mode

On
Off
Back
Description of the option
The display shows informa-
tion about the options.
Refer to ' Demo mode '.
To go back to the menu op-
tion.
2. Set the water softener to the high-
est level.
3. Make sure that the salt container
and the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent
and without dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the released quantity of rinse
aid.
DEMO MODE
With this option you can simulate a pro-
gramme.
Factory setting: off.
1. Open the menu option.
2. Go to Demo mode and activate the
option. The option is active when
you see DEMO in upper left corner
of the display.
Deactivate the Demo mode if
you want to use the appliance.