28 electrolux What to do if...
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can
be solved easily without calling out an engineer. Before contacting your local
Service Centre, please carry out the checks listed below.
During machine operation it is possible that the red pilot light of button
one of the following alarm codes appears on the display and at the same some
acoustic signals sound every 20 seconds to indicate that the machine is not
working:
E10
: problem with the water supply
●
E20
: problem with water draining
●
E40
: door open.
●
Once the problem has been eliminated, press button
If after all checks, the problem persists, contact your local Service Centre.
Malfunction
The washing machine does
not start:
The machine does not fill:
Possible cause
The door has not been
●
E40
closed.
.
The plug is not properly
●
inserted in the power
socket.
There is no power at the
●
socket.
The main fuse or the
●
fuse in the plug has
blown.
The selector dial is not
●
correctly positioned and
8
button
has not been
pressed.
The Delay Start or the Child
●
Safety Lock has been
selected.
The water tap is closed.
●
E10
The inlet hose is squashed
●
E10
or kinked.
The filter in the inlet hose is
●
E10
blocked.
The door is not properly
●
E40
closed.
8
to restart the programme.
Solution
Close the door firmly.
●
Insert the plug into the
●
power socket.
Please check your domestic
●
electrical installation.
Replace the fuse.
●
Please turn the selector dial
●
and press button again.
Cancel the Delay Start or
●
deactivate the Child Safety
Lock.
Open the water tap.
●
Check the inlet hose
●
connection.
Clean the water inlet hose
●
filter.
Close the door firmly.
●
8
flashes,