Table of Contents
Advertisement
Digital Media Adapter User Guide
Upgrade BIN File: This is the folder where the new firmware is located. Click
on the Browse button to select the appropriate folder, and then click on the
OK button.
SETP 2:
Switch the TV into AV1 or AV2 mode, depending on how you have connected
the composite audio / video cable.
SETP 3:
You will then see the main menu with three options. The image below depicts
the main menu.
SETP 4:
Using your remote control, press 2 to enter the Setup screen. You will then
see three tabs on the left side of the screen. Press the DOWN arrow twice to
move to Initial Setting.
38
Advertisement
Table of Contents
