Controls; Power/Esc Button; Thumb Stick Operation; Hold Key - Locosys GT-31 Owner's Manual

POWER/ESC BUTTON

Press this button and hold to
When power is turned on this button functions the same as ESC.
Press in to escape the current page
Under any Main Pages, it is also used as a toggle key to turn on/off LCM
backlight if [SETTINGS]/[BACKLIGHT] is set to ON and [SETTINGS]
\[BACKLIGHT TIME] is set to OFF.
THUMB STICK (TS) OPREATION
It's a 5-way directional controller.
Move the TS Up, Down, Left or Right to highlight the option.
Press In the TS to confirm, or execute the option.
Press Power/ESC button to escape the current page.
At any stage, press In and Hold
function. The hold key function can be defined in [SETTINGS]
/[HOLD KEY]. If [MARK] is defined, HOLD KEY will save the
current location if available, as a new waypoint. If [KEY LOCK]
is defined, HOLD KEY is used to lock or unlock TS and ESC.
The key icon( ) shown in status bar indicates the unit is in key
lock stage.
Power ON or Power OFF

HOLD KEY

the TS to activate hold key

Controls

7
Press In