Locosys GT-31 Owner's Manual page 38

Page Tree
Log Switch
Min Speed
NMEA Items
File Size
Note: To prevent data lost on the memory card,
selected, and generates a new file automatically. And then, start again to store the data until
When the card is
correctly inserted
file size selected has been reached. Therefore, it is safer to select small file size. However, it
Format Card
also depends on post-processing requirement to select file sizes.
Remove Card
Memory Card
(continued)
Select proper size to log the track data.
File sizes can be set:128,512,1024,2048KB or card size
When CARD SIZE is selected, GT-31 stores the data on the
card continuously until the card memory is full.
If the card is properly inserted, the following pages will be
shown:
Format Card: Format the card to FAT16 file system.
Note: All data on memory card will be erased when the
Format Card has been selected.
Remove Card: Before taking out the memory card, execute
this function to save the file, or the file could be damaged.
38
GT-31 will store the data up to the file size
Total data logged
Data logged since power on(TXT or SBN)
/
card size