Prism Sound ADA-8 Operation Manual page 9

Prism Sound ADA-8 Multi-channel A/D D/A Converter Operation Manual - Revision 1.00
you want to modify. Normally Path 1 is configured as the A/D Path and Path 2 as the D/A
Path, although other variations are possible – check that you are dealing with the desired
Path by observing the signal flow indicated by the LEDs on the Mimic Panel in each of the
states of the 'Path' selector button.
Choose the appropriate Access button to take you to the first parameter you want to alter.
For example, if you want to change something to do with the analogue input of an A/D Path,
press the Access button in the 'Source' box. This action takes the Menu Panel (with the LCD
display) directly to the cluster of Menus which deal with the analogue inputs. Pressing the
SOURCE Access button again moves to the next analogue-input-related Menu and so on, in
a cyclic fashion. When you have found the Menu you want, you should be able to alter the
desired parameter using the Menu keys (in combination with the Channel Select buttons at
the bottom of the Meter Panel if the parameter must be altered per-channel).
If you can't find how to access the desired parameters, refer to the Firmware Reference. If
the parameters are obscure, you may need to navigate the Menu system manually without
the help of the Access buttons.
Finally, you should be able to check the correct operation of the ADA-8 in system by using the
eight bargraph meters on the Meter Panel, and perhaps also the two-channel Monitor feature,
which is controlled from the Monitor Panel at the left-hand side of the unit. Note that both of
these Panels are also assignable to either of the two eight-channel Paths with their own
[Path] selector buttons.
© Prism Media Products Limited, 2002 Page 1.9