Airplane Use; Storing Latch - Graco Infant Restraint/Carrier Owner's Manual

8.1 Airplane Use

Install in an airplane the same way as
in an automobile with a lap only belt. Notify
the airline ahead of time that you intend to
bring the seat on board.
Use only in forward-facing aircraft seat. Follow the flight
attendants instructions about infant restraint placement.
Do not use this infant restraint if the airplane seat belt does
not hold the infant restraint securely.

8.2 Storing LATCH

1. For ease of storing, extend
LATCH to its maximum length.
2. Locate the storage bars on
bottom of infant restraint base .
3. Fasten connector (without
adjustment belt) onto storage bar.
4. Repeat step 3 for connector with
adjustment belt. After fastening
onto storage bar, pull on
adjustment belt to make sure
LATCH is securely fastened.
5. LATCH storage should look
like this when complete .
Storage bars
Underside of base
41