Product Specifications - Ryobi ESS3215V Owner's Operating Manual

GENERAL SAFETY RULES
Do not overreach. Keep proper footing and balance
n
at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose clothing or jew-
n
ellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
If devices are provided for the connection of dust
n
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
n
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not
n
turn it on and off. Any power tool that can not be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source before
n
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children
n
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or
n
bindling of moving parts, breakage of parts and any
other condition that may affect the power tools opera-
tion. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly main-
n
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.,
n
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
English
SERVICE
Have your power tool serviced by a qualified repair
n
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Check damaged parts. Before further use of the tool, a
n
guard or other part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, free running of moving parts, breakage
of parts, mounting and any other part that is damaged
should be properly repaired or replaced by an author-
ized service center unless otherwise indicated in this
instruction manual.Have defective switches replaced
by an authorized service facility. Do not use the tool if
the switch does not turn it on and off.
SPECIFIC SAFETY INSTRUCTIONS FOR SANDERS
Always wear safety goggles and a dust mask when
n
sanding, especially sanding over-head.
The machine is not suitable for wet sanding.
n
Do not use sanding paper larger than needed. Extra
n
paper extending beyond the sanding pad can also
cause serious lacerations.
The dust bag shall be equipped with the tool. It shall
n
be emptied frequently. To connect dust bag, insert the
adapter of dust bag to the dust-collection opening on
the rear end of the sander.
WARNING
Do not throw sanding dust on an open fire because
materials in fine particle form may be explosive.
WARNING
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.

PRODUCT SPECIFICATIONS

Input
Wattage
No load speed
Orbital diameter
Weight
2
240 V 50 Hz
320 W
6000-12000 min -1
2.2 mm
2.2 kg