MAINTENANCE
CLEANING THE SANDING SHEETS
The sanding sheets that came with your sander are made
to be re-used. Therefore, it is important that they be cleaned
periodically to remove sanding residue and foreign material
that can accumulate over time.
To clean sanding sheets, rub the sheets with a hard rubber
block. You can also use the clean rubber sole of a shoe.
WARNING
Always remove scrubbing or sanding pad from
sander before cleaning. Failure to do so could
cause serious personal injury.
English
SYMBOL
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
V.................................................................................Volts
Hz.............................................................................Hertz
........................................................Alternating Current
W.............................................................................. Watts
n
.............................................................. No load Speed
0
min
-1
...................Revolutions or reciprocation per minute
...................................................Double Insulation
....................................Read instruction manual
...................Wear Personal protective equipment
....................................Recycle raw materials
instead of disposing as waste. The machine,
accessories and packaging should be sorted for
environmental-friendly recycling.
6