Call Transfer - Doro ip810c Manual

Call Transfer

This call function allows your phone (extB) to transfer an active call from extA to a third
phone (extC) without announcing the call to extC ("Blind Transfer") or with prior
announcement ("Attended Transfer").
Note: Your VoIP PBX must support this functionality.
Blind Transfer
Action: Perform a "Blind Transfer"
ip810c
extA 1:10
Press
LED5 P5
Transfer
Result: The call from extA is blindly transferred to extC. If extC is busy or not responding
there will be no feedback to extB and the call would be forwarded to extC's voicemail if so
configured.
Attended Transfer
Action: Perform an "Attended Transfer"
ip810c
Place the caller on hold (see page 68), and then dial extC's number. When extC answers, announce the call. If
extC wishes to accept the call, press:
LED5 P5
Transfer
The list of held calls is displayed. If there is more than one held call, choose the party you want to transfer by
Number: extA
Result: The call from extA is transferred to extC.
User Manual - English
ip820c
1:10
extA
... ... ... ...
extA will be placed on hold automatically.
Enter extC and press
ip820c
using and press
Number: extA
Edit Cancel
ip830c
—— Connected ——
extA
Press
Transfer
or hang up to confirm.
ip830c
Transfer
or to confirm.
——— Number ———
extA
7 2
ip840c
Connected time
extA
extB
ip840c
Number
extA
extB