Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both web and
phone user interface.
Action: Enable administrator mode via web user interface or phone user interface
ip810c
Enter the settings menu (see page 24) and navigate through the menu (see page 21) until the following
not
supported
Result: Administrator Mode has been enabled.
Firmware Update
The phone is delivered with pre-installed software (firmware) which allows operating your
phone flawlessly. However, it is recommended to maintain the phone's firmware up-to-date by
using the latest official release published on Doro's website:
http://www.doro.com/
Note: Only advanced users should conduct a firmware update. If your phone
operates in a locally hosted VoIP PBX environment ask your system
administrator.
User Manual - English
ip820c
Setup Advanced Enter Administrator Password
Save by clicking Save
or
screen is displayed:
not
supported
4 5
ip830c
1 Administrator Mode
2
...
Press
—— User Mode ——
Admin Password:
Enter the administrator password and press
ip840c
1 Administrator Mode
2 ...
User Mode
Admin Password: