Tone Scheme - Doro ip810c Manual

(3b) Manual Basic Configuration
When mass deployment is not used or incomplete, you will be prompted to enter the basic
configuration manually.
Phone User Interface Language
Action: The default phone user interface language is "English". Choose your preferred phone
user interface language.
ip810c
Firmware Versions below 7 provide integrated multiple language support.
Note: Since Firmware Version 7 additional languages can only be provided via
mass deployment.
For further information read the instructions in our administrator manual
Sel. Language:
English
Use
Result: The selected phone user interface language will be used for all following dialogs.

Tone Scheme

This setting determines country-specific call progress tones, e.g. dial tone, busy signal, etc.
Action: Choose the country tone scheme (Australia ... USA)
ip810c
Sel. Tone Scheme:
Australia
Use
Result: The tone scheme has been configured.
User Manual - English
ip820c
Select Language
English
for navigation and select your preferred language from the list.
Press to confirm your choice.
ip820c
Select Tone Scheme
Australia
for navigation and select your country's tone scheme from the list.
Press to confirm your choice.
ip830c
Select Language:
English
Suomi
Frances
Italiano
ip830c
Select Tone Scheme:
Australia
China
Denmark
France
1 5
ip840c
Not applicable
Integrated multiple
language support
Language time
English
Suomi
Francais
Italiano
...
ip840c
Tone Scheme time
Australia
China
Denmark
France
...